Gut Microbiome and Metabolome Modulation by High-Hydrostatic-Pressure-Processed Tomato Juice.

High hydrostatic pressure (HHP) is a non-thermal pasteurization technology for the enhancement of food products' safety and quality. The components of tomato juice can be affected by HHP processing. Little is known about the effects of HHP-processed tomato juice on the gut microbiome and metabolism. Here, we performed high-throughput sequencing and metabolomics profiling to determine the critical differences in gut microbiota structure and metabolic profiles in mice administered with HHP-processed tomato juice. Tomato juice administration significantly increased the gut bacterial alpha diversity and the relative abundance of Bacteroides. The mice administered with HHP-processed tomato juice were characterized by the enrichment of Bacteroidetes, Alistieps, and Faecalibaculum compared with those administered with HTST-processed tomato juice. Moreover, HHP-processed tomato juice promoted SCFA levels, which were positively correlated with the enriched Alistieps. Our results show that HHP-processed tomato juice may drive healthy gut microbes and metabolites.

Ultraviolet irradiation as alternative non-thermal cold pasteurization to improve quality and microbiological parameters of mango juice during cold storage.

The objectives of this research were to study the effect of UV irradiation on quality characteristics of mango juice during cold storage. Mango juice exposed to UV radiation was also used to determine zero-order and first-order kinetic models of microbial (total plate count, yeast and mold count, and Escherichia coli) reduction. According to the microbiological results, UV light at 120 J/cm2 caused a 5.19 log reduction. It was found that microbial inactivation of all tested microorganisms followed first-order kinetic model. The treatments did not differ significantly in terms of the quality metrics. L*, b*, pH, total soluble solid, total phenolic compound, total flavonoid content, and antioxidant activity as measured by the DPPH and FRAP assay all tended to decline during storage at 4 °C, whereas a*, ∆E, titratable acidity, total plate count, yeast and mold count, as well as the total plate count, had an increasing trend. During storage at 4 °C, UV irradiation increased the shelf life of mango juice by about 14 days compared to the control sample. In conclusion, this study demonstrated the potential of UV treatment as an alternative to thermal pasteurization for preserving mango juice quality and safety while also prolonging shelf life.

Pulsed electric field treatment for preservation of Chlorella suspensions and retention of gelling capacity.

Pulsed electric field (PEF) processing has emerged as an alternative to thermal pasteurization for the shelf-life extension of heat-sensitive liquids at industrial scale. It offers the advantage of minimal alteration in physicochemical characteristics and functional properties. In this study, a pilot-scale continuous PEF processing (Toutlet < 55 °C) was applied to microalgae Chlorella vulgaris (Cv) suspensions (pH = 6.5), which was proposed as a functional ingredient for plant-based foods. Cv suspensions were inoculated with three distinct food spoilage microorganisms (Pseudomonas guariconensis, Enterobacter soli and Lactococcus lactis), isolated from the Cv biomass. PEF treatments were applied with varying electric field strength Eel of 16 to 28 kV/cm, pulse repetition rate f of 100 to 140 Hz, with a pulse width τ of 20 µs and an inlet product temperature Tin of 30 °C. The aim was to evaluate the PEF-induced microbial reduction and monitor the microbial outgrowth during a 10-day cold storage period (10 °C). Maximum inactivation of 4.1, 3.7 and 3.6 logs was achieved (28 kV/cm and 120 Hz) for the investigated isolates, respectively. Under these conditions, the critical electric field strengths Ecrit, above which inactivation was observed, ranged from 22.6 to 24.6 kV/cm. Moreover, repeated PEF treatment resulted in similar inactivation efficiency, indicating its potential to enhance shelf-life further.

Protein aggregation caused by pasteurization processing affects the foam performance of liquid egg white.

Pasteurization is necessary during the production of liquid egg whites (LEW), but the thermal effects in pasteurization could cause an unavoidable loss of foaming properties of LEW. This study intended to investigate the mechanism of pasteurization processing affects the foam performance of LEW. The foaming capacity (FC) of LEW deteriorated significantly (ΔFCmax = 72.33 %) and foaming stability (FS) increased slightly (ΔFSmax = 3.64 %) under different temperature-time combinations of pasteurization conditions (P < 0.05). The increased turbidity and the decreased solubility together with the decreased absolute value of Zeta potential indicated the generation of thermally induced aggregates and the instability of the protein particles, Rheological characterization demonstrated improved viscoelasticity in pasteurization liquid egg whites (PLEW), explaining enhanced FS. The study revealed that loss in foaming properties of PLEW resulted from thermal-induced protein structural changes and aggregation, particularly affecting FC. This provided a theoretical reference for the production and processing of LEW products.

Influence of pasteurization and spray drying on the fat digestion behavior of human milk fat analog emulsion: a simulated in vitro infant digestion study.

BACKGROUND: Human milk fat analog emulsion (HMFAE) is an emulsion that mimics the composition and structure of human milk (HM) fat globules. The application of HMFAE in infant formula requires a series of milk powder processing steps, such as pasteurization and spray drying. However, the effect of milk powder processing on fat digestion of HMFAE is still unclear. In this study, the influence of pasteurization and spray drying on the lipolysis behavior of HMFAE was studied and compared with HM using a simulated infant in vitro digestion model. RESULTS: Pasteurization and spray drying increased the flocculation and aggregation of lipid droplets in HMFAE during digestion. Spray drying destroyed the lipid droplet structure of HMFAE, and partial milk fat globule membrane-covered lipid droplets turned into protein-covered lipid droplets, which aggravated lipid-protein aggregation during gastric digestion and hindered fat digestion in the small intestine. The final lipolysis degree was in the order HM (64.55%) > HMFAE (63.41%) > pasteurized HMFAE (61.75%) > spray-dried HMFAE (60.57%). After complete gastrointestinal digestion, there were no significant differences in free fatty acid and sn-2 monoacylglycerol profile among the HMFAE, pasteurized HMFAE, and spray-dried HMFAE. CONCLUSION: Milk powder processing can reduce lipolysis by altering the lipid droplet structure of HMFAE and the degree of lipid droplet aggregation during digestion. © 2024 Society of Chemical Industry.

Effect of different sterilization methods on the appearance, composition, and flavor of sugarcane juice.

Cold-pressed sugarcane juice (SCJ) is a beverage rich in vitamins, carbohydrates, and antioxidants. Various sterilization methods impact fruit juice's appearance, nutrients, and flavor. Hence, this study aims to assess how different sterilization techniques affect the flavor, appearance, and nutritional value of SCJ. Freshly prepared SCJs were subjected to two sterilization methods: pasteurization (referred to as PTG) and autoclaving (referred to as HTHP). The pasteurization process was carried out at 63°C for 30 min, whereas the HTHP process was applied at 115°C for 30 min. The appearances, Brix value, colors, sugar, organic acid content, and aromatic compounds were determined. The Brix and pH values of the juice show little variation across different heat treatments. The color index of PTG was similar to that of the control group, whereas the L* value of HTHP increased about 21%, resulting in a significant color change. The glucose and fructose contents of HTHP were 7.03 and 5.41 mg/mL, which were much higher than those of PTG (3.26 and 2.33 mg/mL) and control group (3.33 and 2.48 mg/mL). A total of 77 aromatic compounds were identified in the SCJ after various heat treatments. Among them, pentanoic acid, octanal, and ß-damascenone were the most abundant substances contributing to the overall flavor in the control group, PTG, and HTHP. Pasteurization preserved the original flavor of the juice, whereas autoclaving triggered the Maillard reaction, forming pyrazine and furan-like compounds that altered the SCJ's flavor. In conclusion, pasteurization retained SCJ's original characteristics, whereas HTHP induces changes in nutrition and imparts a distinct flavor.

Phytochemicals, antioxidant capacities and volatile compounds changes in fermented spicy Chinese cabbage sauces treated by thermal and non-thermal technologies.

To extend shelf life of fermented spicy Chinese cabbage sauce at room temperature, the effects of electron beam irradiation (EBI), high pressure processing (HPP), pasteurization (PT) and autoclave sterilization (AS) treatments on the colony counts of Lactobacillus plantarum, phytochemicals, antioxidant activities and volatile compounds were investigated. Results showed that thermal and non-thermal treatments could significantly decrease the colony counts of Lactobacillus plantarum, in which EBI and AS treatments inactivated Lactobacillus plantarum thoroughly. EBI and HPP treatments were superior to PT and AS treatments in terms of volatile compounds, bioactive compounds and antioxidant activities. The total contents of volatile compounds in sauces treated by EBI and HPP were significantly increased by 43.92%-61.87% and 71.53%-84.46%, respectively, and the new formed substance 2,3-butanedione endowed sauces with sweet and creamy aroma. In addition, HPP treatment improved the extractable contents of total phenolics and carotenoids, retained capsicum red pigment content, and significantly enhanced antioxidant capacities of sauces. Sauce treated by HPP at 200 MPa exhibited the highest total carotenoid content, DPPH radical scavenging activity and FRAP, increasing by 9.27%, 2.24% and 16.13%, respectively, compared with CK. EBI treatment exhibited higher total phenolic content and FRAP, which positively depended on the dose. Therefore, HPP and EBI treatments were suggested as potential technologies to improve shelf-life stability and volatile compounds of fermented spicy Chinese cabbage sauce.

Milk microbiome transplantation: recolonizing donor milk with mother's own milk microbiota.

Donor human milk (DHM) provides myriad nutritional and immunological benefits for preterm and low birthweight infants. However, pasteurization leaves DHM devoid of potentially beneficial milk microbiota. In the present study, we performed milk microbiome transplantation from freshly collected mother's own milk (MOM) into pasteurized DHM. Small volumes of MOM (5%, 10%, or 30% v/v) were inoculated into pasteurized DHM and incubated at 37 °C for up to 8 h. Further, we compared microbiome recolonization in UV-C-treated and Holder-pasteurized DHM, as UV-C treatment has been shown to conserve important biochemical components of DHM that are lost during Holder pasteurization. Bacterial culture and viability-coupled metataxonomic sequencing were employed to assess the effectiveness of milk microbiome transplantation. Growth of transplanted MOM bacteria occurred rapidly in recolonized DHM samples; however, a greater level of growth was observed in Holder-pasteurized DHM compared to UV-C-treated DHM, potentially due to the conserved antimicrobial properties in UV-C-treated DHM. Viability-coupled metataxonomic analysis demonstrated similarity between recolonized DHM samples and fresh MOM samples, suggesting that the milk microbiome can be successfully transplanted into pasteurized DHM. These results highlight the potential of MOM microbiota transplantation to restore the microbial composition of UV-C-treated and Holder-pasteurized DHM and enhance the nutritional and immunological benefits of DHM for preterm and vulnerable infants. KEY POINTS: • Mother's own milk microbiome can be successfully transplanted into donor human milk. • Recolonization is equally successful in UV-C-treated and Holder-pasteurized milk. • Recolonization time should be restricted due to rapid bacterial growth.

Effects of ohmic heating with different voltages on the quality and microbial diversity of cow milk during thermal treatment and subsequent cold storage.

Ohmic heating (OH), an innovative heating technology, presents potential applications in the pasteurization of liquid foods. Therefore, the study was conducted to evaluate the effect of OH at various voltage gradients (10 V/cm, 12.5 V/cm, and 15 V/cm) and water bath (WB) on microbial inactivation, physicochemical and sensory properties and microbial flora of pasteurized milk. Results indicated that OH with higher voltage could effectively inactivate microorganisms in milk, requiring less heating time and energy. Moreover, OH treatment at higher voltages could decelerate lipid oxidation and better maintain the sensory quality and essential amino acids content of milk. Additionally, all treatments significantly altered the microbial community, and during storage, the microbial community in milk treated with 10 V/cm and 12.5 V/cm OH remained relatively stable. OH treatments with voltage gradients exceeding 12.5 V/cm could effectively inactive microorganisms and maintain the quality attributes of milk.

Gram-negative postpasteurization contamination patterns of single-serve fluid milk produced in 4 different processing facilities.

An analysis of historic data on high temperature, short time (HTST) fluid milk quality showed higher total bacterial counts and lower sensory defect judging scores at d 14 postprocessing for milk packaged in single-serve containers as compared with milk packaged in half-gallon containers from the same processing facilities. As postpasteurization contamination with gram-negative bacteria is likely a major contributor to an increased spoilage risk associated with milk packaged in single-serve containers, we performed a comprehensive assessment of the microbial quality and shelf life of 265 commingled single-serve HTST fluid milk samples (including white [unflavored] skim, white [unflavored] 1%, chocolate skim, and chocolate 1%) collected over 2 visits to 4 commercial fluid milk processing facilities. Over 2 initial sampling visits, the frequency of gram-negative spoilage ranged from 14 to 79% of the product collected from the 4 facilities, with significant differences of gram-negative spoilage frequency between sampling visits, facilities (sampling visit 1, sampling visit 2, and both sampling visits combined), milk types (sampling visit 2), and filler lanes (sampling visit 2). We found no significant differences in the frequency of gram-negative spoilage between sampling time points (e.g., beginning, middle, and end of production run). Across facilities, single-serve containers of milk with gram-negative contamination showed significantly higher bacterial counts on d 7 and 14 and significantly lower sensory scores as compared with those without gram-negative contamination. Follow-up investigations, based on in-facility surveys that identified carton forming mandrels as filler components that frequently failed quality assurance ATP swab checks, found that bacterial genera, including Pseudomonas and Bacillus, isolated from single-serve milk samples were also frequently isolated from mandrels. Although interventions aimed at improving cleaning and sanitation of mandrels did not lead to significant reduction of gram-negative spoilage frequency in a comparison of 398 control and 400 intervention samples, our data still suggest that the unhygienic design of single-serve fillers is likely a root cause of gram-negative contamination of single-serve milk.

Foaming properties of milk samples collected at various processing stages in a dairy processing factory across two seasons.

BACKGROUND: A foam layer makes an essential contribution to the quality of cappuccino-style drinks. Poor foaming of milk occurs quite often, however, especially in summer. The reasons for this are still unknown. Although a substantial number of studies on the foaming process of milk have been reported, these studies have been laboratory based and have used laboratory or pilot-scale equipment to simulate the processing conditions of a dairy processing factory. This study collected about 40 different samples across different processing stages in a dairy factory over two seasons (two batches per season) and investigated their composition and physical and foaming properties by mechanical mixing and steam injection. RESULTS: The results showed that milk samples collected in summer had a significantly higher content of fat, free fatty acids, and Ca2+ ions, and larger particle sizes but a markedly lower concentration of protein and solid non-fat, and surface tension than the samples collected in spring. These differences provided spring milk with a higher steam injection foamability than summer milk. However, steam injection foam stability, and mechanical mixing foamability and foam stability were not affected by seasonal factors. Milk samples collected in different batches within a season were almost identical with regard to the properties that were investigated. CONCLUSION: The variations in composition and physical properties of milk collected between two seasons could be the reasons for their difference in foamability but not for foam stability. Processes such as standardization, homogenization, and pasteurization improved markedly the foaming properties of milk. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Effects of pasteurization on osteopontin concentrations in human breastmilk.

BACKGROUND: Osteopontin (OPN) is an important breastmilk protein involved in infant intestinal, immunological, and brain development. However, little is known about how common milk pasteurization and storage techniques affect this important bioactive protein. METHODS: Human milk osteopontin concentration was measured in single-donor fresh (n = 1) or frozen (n = 20) breastmilk, pooled Holder-pasteurized donor breastmilk (n = 11), and a shelf-stable (retort pasteurized) breastmilk product (n = 2) by ELISA. Single-donor breastmilk samples were subjected to pasteurization and/or freezing before measuring osteopontin concentrations. RESULTS: Holder pasteurization of breastmilk resulted in an ∼50% decrease in osteopontin concentration within single-donor samples. Breastmilk from mothers of preterm infants trended toward higher osteopontin concentration than mothers of term infants; however, samples from preterm mothers experienced greater osteopontin degradation upon pasteurization. A commercial breastmilk product that underwent retort pasteurization had lower osteopontin concentration than a Holder-pasteurized pooled breastmilk product. Finally, freezing breastmilk prior to Holder pasteurization resulted in less osteopontin degradation than Holder pasteurization prior to freezing. CONCLUSIONS: Commonly used breastmilk pasteurization and storage techniques, including freezing and Holder pasteurization, decrease the concentration of the bioactive protein osteopontin in human breastmilk. Holder pasteurization reduced osteopontin concentration by an average of 63%, while freezing resulted in an 8-12% decrease. IMPACT: Pasteurization of human breastmilk significantly decreases the concentration of the bioactive protein osteopontin. Use of both pasteurization and freezing techniques for breastmilk preservation results in greater loss of osteopontin. This study presents for the first time an analysis of osteopontin concentrations in single-donor pasteurized milk samples.

Impact of refrigerated storage on (bio)chemical conversions of health-related compounds in pretreated, pasteurized Brussels sprouts and leek.

Vegetable processing often consists of multiple processing steps. Research mostly focused on the impact of individual processing steps on individual health-related compounds. However, there is a need for more holistic approaches to understand the overall impact of the processing chain on the health potential of vegetables. Therefore, this work studied the impact of pretreatment (relatively intact versus pureed vegetable systems), pasteurization and subsequent refrigerated storage (kinetic evaluation) on multiple health-related compounds (vitamin C, vitamin K1, carotenoids, glucosinolates and S-alk(en)yl-L-cysteine sulfoxides (ACSOs)) in Brussels sprouts and leek. It could be shown that differences introduced by different types of pretreatment were not nullified during pasteurization and refrigerated storage. Clearly, enzymatic conversions controlled during pretreatment resulted in different health-related compound profiles still observable after pasteurization. Moreover, about -42% and -100% relative concentration differences of ACSOs and dehydroascorbic acid, respectively, were detected immediately after pasteurization, while glucosinolates concentrations decreased by about 47% during refrigerated storage. All other compounds were stable during pasteurization and refrigerated storage.

Effects of ultra-high pressure, thermal pasteurization, and ultra-high temperature sterilization on color and nutritional components of freshly-squeezed lettuce juice.

The aim of this study was to evaluate the effects of ultra-high pressure (UHP, 600 MPa/2 min), thermal pasteurization (TP, 95 °C/1 min) and ultra-high temperature (UHT, 115 °C/5 s) sterilization on the color, sensory evaluation, microorganisms, physicochemical characteristics and nutritional components of freshly-squeezed lettuce juice (FLJ). Results showed that three sterilization methods demonstrated desirable inactivation effects on total aerobic bacteria, yeast and mold, and there were no significant changes in the main nutritional components, including ash, protein, carbohydrate and total dietary fiber. However, UHT and TP significantly affected the color of FLJ from bright green to light brown and made chlorophyll, ß-carotene and vitamins (VE, VC, VK1, VB6, VB12, and folic acid) contents markedly decreased. By contrast, UHP maintained the original color, fresh-like sensory qualities, vitamins, and carotene of FLJ to the greatest extent. Our results provide a promising application of UHP in the large-scale processing of FLJ.

Rapid Versus Slow Cooling Pasteurization of Donor Breast Milk: Does the Cooling Rate Effect Melatonin Reduction?

Background and Objective: There is a question as to whether melatonin levels in breast milk are impacted by the cooling rate postpasteurization. Past research that has used in the Australian donor bank's breast milk Holder Pasteurization technique has reported varying findings regarding melatonin levels postpasteurization. Where breast milk was cooled slowly, a significant reduction in breast milk melatonin levels was observed. Conversely, where a rapid cooling method was used, there was no significant reduction in melatonin levels. The aim of this study was to investigate whether the cooling process between the different pasteurization techniques impact on melatonin levels in breast milk postpasteurization. Materials and Methods: Twenty-seven nighttime breast milk samples were collected, with each sample divided into three; one remained unpasteurized, one was pasteurized and rapidly cooled to 4°C, and the other was pasteurized and cooled slowly to 4°C. Results: Melatonin levels were significantly reduced in both the rapidly cooled and slow cooled breast milk samples when compared to their unpasteurized counterpart (p < 0.001). There was no significant difference in melatonin levels between the two cooling methods (p = 0.91). Conclusion: This study showed that both the rapid and cooling pasteurization processes had a similar reduction in melatonin levels in breast milk. However, even after pasteurization melatonin was still present. Therefore, it is recommended that donor banks still take into consideration circadian timing hormones such as melatonin and the time of day breast milk is expressed.

Non-thermal technologies for the conservation of açai pulp and derived products: A comprehensive review.

Açai (Euterpe oleracea) is one of the main sustainable extractive crops in the Amazon region, widely consumed by the local population and a significant export product. This review presents the current knowledge regarding nonthermal technologies employed in açai processing. This review aims to discuss and compare the main results attained by the application of HPP, ultrasound, ozone, UV light, cold plasma, and pulsed electric field on microbial inactivation, enzymatic inhibition, and the content of anthocyanin and other bioactive compounds after açai pulp processing. The discussion compares these technologies with pasteurization, the current main technology applied to açai sanitization. This review shows that there are still many gaps to be filled concerning açai processing in thermal and non-thermal technologies. Data analysis allowed the conclusion that pasteurization and HPP are, up to now, the only technologies that enable a 5-log CFU reduction of yeasts, molds, and some bacteria in açai. However, no study has reported the inactivation of Trypanosoma cruzi, which is the major gap found in current knowledge. Other technologies, such as pulsed electric field, cold plasma, and ultrasound, require further development and process intensification studies to be as successful as HPP and pasteurization.

Influence of Pasteurization on Maillard Reaction in Lactose-Free Milk.

In order to improve the safety and quality of lactose-free milk (LFM) Maillard reaction products (MRPs), this study used raw cow's milk as raw material and lactase hydrolysis to prepare LFM, which was heat-treated using pasteurization and then placed in storage temperatures of 4 °C, 25 °C and 37 °C to investigate the changes in the Maillard reaction (MR). The results of the orthogonal test showed that the optimal conditions for the hydrolysis of LFM are as follows: the hydrolysis temperature was 38 °C, the addition of lactase was 0.03%, and the hydrolysis time was 2.5 h. Under these conditions, the lactose hydrolysis rate reached 97.08%, and the lactose residue was only 0.15 g/100 g as determined by high-performance liquid chromatography (HPLC), complying with the standard of LFM in GB 28050-2011. The contents of furoamic acid and 5-hydroxymethylfurfural were determined by high-performance liquid chromatography, the color difference was determined by CR-400 color difference meter, and the internal fluorescence spectrum was determined by F-320 fluorescence spectrophotometer. The test results showed that the variation range of furosine in lactose-free milk after pasteurization was 44.56~136.45 mg/100g protein, the range of 5-hydroxymethylfurfural (HMF) was 12.51~16.83 mg/kg, the color difference ranges from 88.11 to 102.53 in L*, from -0.83 to -0.10 in a*, and from 1.88 to 5.47 in b*. The furosine content of LFM during storage at 4, 25, and 37 °C ranged from 44.56 to 167.85, 44.56 to 287.13, and 44.56 to 283.72 mg/100 g protein, respectively. The average daily increase in protein content was 1.18-3.93, 6.46-18.73, and 15.7-37.66 mg/100 g, respectively. The variation range of HMF was 12.51~17.61, 12.51~23.38, and 12.51~21.1 mg/kg, and the average daily increase content was 0.03~0.07, 0.47~0.68, and 0.51~0.97 mg/kg, respectively. During storage at 4 °C, the color difference of LFM ranged from 86.82 to 103.82, a* ranged from -1.17 to -0.04, and b* ranged from 1.47 to 5.70. At 25 °C, color difference L* ranges from 72.09 to 102.35, a* ranges from -1.60 to -0.03, b* ranges from 1.27 to 6.13, and at 37 °C, color difference L* ranges from 58.84 to 102.35, a* ranges from -2.65 to 1.66, and b* ranges from 0.54 to 5.99. The maximum fluorescence intensity (FI) of LFM varies from 131.13 to 173.97, 59.46 to 173.97, and 29.83 to 173.97 at 4, 25, and 37 °C. In order to reduce the effect of the Maillard reaction on LFM, it is recommended to pasteurize it at 70 °C-15 s and drink it as soon as possible during the shelf life within 4 °C.

[Investigation of the Effect of Pasteurization on the Viability of Cryptosporidium parvum in Cow's Milk by Propidium Monoazide qPCR]. / Pastörizasyonun Inek Sütündeki Cryptosporidium parvum Canliligi Üzerine Etkisinin Propidium Monoazide qPCR ile Arastirilmasi.

Cow's milk, which is one of today's most important food sources, can be a reservoir for many pathogens that create a risk to public health. One of these pathogens is Cryptosporidium parvum. The oocysts of C.parvum, an obligate intracellular parasite, cause infection when ingested orally. The oocysts scattered around with the feces of infected cows or calves can contaminate raw milk and this is frequently seen in dairy farms. The aim of this study was to investigate the viability of C.parvum by propidium monoazide (PMA)-quantitative polymerase chain reaction (qPCR) method after heat treatment applied to contaminated raw cow's milk. For the study, 50 ml of unpasteurized cow's milk was contaminated with 5 X 105 C.parvum oocysts and portioned into 1.5 ml microcentrifuge tubes. Three groups, namely the control group, pasteurization group and boiling group were formed. No warming procedure was applied to the control group. In the pasteurization group, the milks in microcentrifuge tubes were poured into the wells of the dry block heater set to 71.7 °C and incubated for five seconds. At the end of the period, the milks were transferred to the wells of the cold metal tube, which was removed at -20 °C with the help of a micropipette, and incubated for five seconds. The milks in the boiling group were incubated for two minutes in a dry block heater set to 95 °C. After the heat treatment, the milks in microcentrifuge tubes were transferred to 10 ml centrifuge tubes, PBS was added to make the final volume 10 ml, and centrifuged at 4000 rpm for 20 minutes. After this process was repeated twice, 400 µl of PBS was added to the precipitate remaining at the bottom, and the precipitate was homogenized. One sample of each group was applied with PMA, while PMA was not applied to the other sample. PMA-applied samples were incubated for five minutes at room temperature and in the dark, and then exposed to UV light for five minutes in the device with cooling feature. The oocysts were collected by centrifugation at 5000 g for five minutes. After DNA isolation from oocysts, SYBR Green real time PCR (Rt-PCR) was performed using primers amplifying the COWP gene region. As a result of SYBR Green Rt-PCR, the mean Ct values of the control without PMA, pasteurization and boiling groups were determined as 25 ± 1.24, 23 ± 0.98 and 26 ± 1.03, respectively. While no peak was obtained in the boiling group after PMA application, the mean Ct values of the control and pasteurization groups were 28 ± 1.38 and 31 ± 1.46, respectively. As a result, it was concluded that live C.parvum cysts in milk could be detected by PMA-qPCR method and live oocysts could be found in pasteurized milk.

Quantitative microbiological risk assessment for the occurrence of listeriosis in Brazil due to the consumption of milk processed by pasteurization or thermosonication.

This study aimed to estimate the risk of listeriosis from the consumption of pasteurized milk in Brazil, comparing conventional treatment with the technology of thermosonication. The Quantitative Microbiological Risk Assessment (QMRA) model was developed, covering the entire milk production chain, from milking to the moment of consumption. In general, higher risks were observed in association with higher initial concentrations of the pathogen and the vulnerable population. The highest risk predicted (3.67 × 10-5) was related to the scenario considering the initial concentration range of L. monocytogenes between 4 and 6 log CFU/mL, with conventional treatment and considering the vulnerable population, resulting in one case of listeriosis every 27,248 servings. When considering thermosonication treatment, lower risks have been predicted. The scenario analysis indicated that the steps related to storage conditions in retail and at the consumer's home (post-processing steps) are the most influential in the associated risk, in all scenarios. The predictive parameters of inactivation related to the applied treatment also have a considerable influence on the risk. The results point to the influence of the stages of the dairy production chain and the thermosonication treatment applied in the food safety of milk, subsidizing information for industrial application and for regulatory agencies.

Effect of pasteurization processing and storage conditions on softening of acidified chili pepper: Pectin and it related enzymes.

The softening of acidified chili peppers induced by processing and storage has become a major challenge for the food industry. This study aims to explore the impact of pasteurization techniques, thermal processing (TP), high-pressure processing (HPP), addition of sodium metabisulfite (SMS), and storage conditions (25 °C, 37 °C, and 42 °C for 30 days) on the texture-related properties of acidified chili pepper. The results showed that the textural properties of samples were destructed by TP (the hardness of samples decreased by 19.43 %) but were less affected by HPP and SMS. Compared with processing, storage temperature had a more dominant impact on texture and pectin characteristics. With increased storage temperature, water-solubilized pectin fraction content increased (increased by 160.99 %, 136.74 %, and 13.01 % in TP, HPP, and SMS-stored groups, respectively), but sodium carbonate-solubilized pectin fraction content decreased (decreased by 29.84 %, 26.81 %, and 8.60 % in TP-, HPP-, and SMS-stored groups, respectively), especially in TP-stored groups. Multivariate data analysis showed that softening was more closely related to pectin conversion induced by acid hydrolysis and pectinase depolymerization. This finding offers new perspectives for the production of acidified chili pepper.